Product Information
SDS

Innovative Green Cleaning Solution

Powerful Degreaser Proven Safe and Effective
Advances in chemistry and technology means a “green” cleaner is no longer a weak cleaner. EnviroTech® Green Cleaner is a powerful degreaser and is proven safe and effective. Product benefits include:
– Superior penetration and removal of oily, greasy particulate soils
– Ability to clean where mechanical or agitation is restricted
– Self-splitting: oils rapidly break from used solution
– Readily biodegradable
– No VOCs or phosphates
– Non-sensitizer to skin
– Excellent rinsing properties
– Very low streak/smear profile

U.S. EPA “Safer Choice Certified Degreaser”* & NSF Food Grade Registered
EPA’s Safer Choice program helps consumers, businesses, and institutional buyers identify cleaning and other products that perform well and are safer for
human health and the environment.
– No hazardous ingredients in packaging
– No dangerous interactions
– No carcinogens or reproductive toxins
– No sensitizers

Applications
This fast-acting cleaner and degreaser combines green emulsion surfactants and builders to handle tough cleaning. EnviroTech® Green Cleaner removes oil residue and hydrocarbon buildup such as grease, motor oil, tar, fuel, fats, heavy soil, and much more. It’s strong enough to reduce grease trap problems during heavy cleaning. EnviroTech® Green Cleaner has been proven an effective replacement for many widely used chemistries in cleaners that are harmful to the enviroment. EnviroTech Green Cleaner is:
– EPA Recognized
– Non-flammable
– Non-corrosive
– NSF Registered
– Biodegradable
– Phosphate-free

Directions
Allow to penetrate soil and contamination then agitate with a sponge, cloth or brush and rinse.

Dilution
1. Light Duty: (1:10) (product:water)
2. Heavy Duty: (1:2) (product:water)

Product Description
– Clear to slightly yellow liquid
– pH < 11.5
– Requires 1:10 dilution for EPA “Safer Choice” Certification
(product:water)
– Sold as concentrate

*EPA/Safer Choice recognition does not constitute endorsement of these products. The Safer Choice logo signifies that the products’ formulas, as Summit has represented it to the EPA, contain ingredients with more positive human health and environmental characteristics than conventional products of the same type. EPA/Safer Choice relies solely on Summit, its integrity and good faith, for information on the products’ composition, ingredients and attributes. EPA/Safer Choice has not independently identified, that is, via chemical analysis, the ingredients in the products’ formula, nor evaluated any of Summit non-ingredient claims. EPA/Safer Choice provides its evaluation only as to the products’ human health and environmental characteristics, as specified in the Standard and based on currently available information and scientific understanding.

Product Information
SDS

Water Scale Solvent Safe for Aluminum.

Aluminum-Safe Solvent
Alimex is a water-based chemical descaler formulated for the safe removal of scale from water-wetted aluminum surfaces.

Aided by wetting agents, corrosion inhibitors and degreasing agents, it effectively loosens and removes deposits from critical aluminum components such as heat exchangers, fin fans, and any other aluminum coated surface.

Color Change Says Clean
A yellow liquid, Alimex descaler changes color when the solution is 95+ percent spent. When the solution begins to turn bluish-purple, it should be changed or added to if the equipment is not clean.

Compatible Materials
Non-corrosive Alimex will not affect aluminum, stainless steel, carbon steel, brass, admiralty metal, titanium, copper, iron, lead, PVC plastic, polyethylene, rubber or leather when used as directed.

Non-Compatible Materials
This formula is not recommended for zinc, galvanized steel or magnesium alloys. If uncertain, a material sample should be submitted for laboratory testing.

Safe and Biodegradable
Alimex is non-toxic, non-corrosive and non-flammable when used as directed. Because it is biodegradable, standard disposal procedures may be followed.

Product Information
SDS

Concrete & Mineral Deposit Cleaner

Mortar/Concrete Remover
Morcon-10 is a hydrochloric acid solution designed to penetrate and quickly remove encrusted scale, cement and barnacles.

Marine/Construction-Site Cleaner
Aided by corrosion inhibitors, detergents, wetting agents and degreasing compounds, it effectively loosens and removes deposits from building forms, concrete mixers, brick, propellers, submerged pipe and power plant exchangers.

Apply to Surface, Circulate or Soak
When used as directed, Morcon-10 may be safely brushed, mopped or sprayed on equipment and structural surfaces. It may be circulated through pumps and exchangers. Parts may be soaked.

Non-Compatible Materials
This formula is not recommended for use on aluminum, aluminum alloys, zinc, galvanized surfaces and magnesium alloys. If uncertain, a material sample should be submitted for laboratory testing.

Improperly used, Morcon-10 could result in the discoloration of vehicle paint finishes. To avoid discoloration of painted surfaces, Morcon-10 should be mixed with water at a 4:1 water to solvent ratio.

Safe and Biodegradable
Morcon-10 is non-toxic, non-corrosive, non-flammable and non-hazardous when used as directed. Because it is biodegradable, standard disposal procedures may be followed.

Product Information
SDS

Removes encrusted lime scale, rust & corrosion.

Closed-Loop Cleaner
Safe for use on aluminum, Sum-Kool descaler is an effective and efficient heat transfer system cleaner designed to remove encrusted lime scale, rust and corrosion products from water-wetted surfaces.

Because it does not produce C02, Sum-Kool doesn’t need to be vented and can be used while equipment is in operation, making it ideal for closed-loop systems.

Solution for Heat-Transfer Problems
Water related scale reduces heat-transfer efficiency in systems and equipment in industries from nuclear power plants to automobile engines. In addition to reducing fluid flow, 1/16th of an inch of scale creates a heat-transfer barrier equivalent to three inches of steel. Sum-Kool is the solution!

Compatible Materials
Non-corrosive Sum-Kool® will not affect stainless steel, carbon steel, brass, admiralty metal, copper, iron, lead, aluminum, PVC plastic, polyethylene, rubber or leather when used as directed.

Non-Compatible Materials
There are none. Because Sum-Kool® is pH neutral (ranging from 6.0 to 8.5), it will not adversely affect metals or materials normally found in water-wetted equipment.

Safe and Biodegradable
Sum-Kool® is non-toxic, non-acid, and non-hazardous when used as directed. Because it is biodegradable, standard disposal procedures may be followed.

Product Information
SDS

Safely remove lime deposits without degrading the metal.

Acid Free Descaler for Galvanized Metal
GalVan-Plus is a non-acid cleaner that works as a replacement for traditional
mineral and organic acids. It will not harm zinc coatings of galvanized metals.

Because it does produce C02, GalVan Plus needs to be vented.

Applications
GalVan-Plus is designed to safely remove lime deposits or water scale from
cooling towers (basin), water lines and galvanized pipe fittings where stronger,
acid-based descalers would degrade the metal.

How to Use
GalVan Plus is most effectively used by circulating through the equipment that needs cleaning, providing that there is adequate venting for the carbon dioxide created in the cleaning process. One gallon of GalVan-Plus will consume 1.1 pounds of Calcium Carbonate (CaCO3).

Cautions and Warnings

  • Not recommended for Aluminum
  • Is non-hazardous to ship by ground but is hazardous to ship by sea and air
  • Ventilate equipment at all times when cleaning as carbon dioxide gas is created during the cleaning process
  • Store at room temperature below 120°F

Safe and Biodegradable
GalVan Plus is non-toxic, non-acid, and non-hazardous when used as directed. Because it is biodegradable, standard disposal procedures may be followed.

Summit is recognized worldwide as one of the leading manufacturers of compressor lubricants. For 30 years, our compressor products have been tested, re-tested and refined to bring what we believe is the finest line of compressor products on the market.

Summit is recognized worldwide as one of the leading manufacturers of compressor lubricants. For 30 years, our compressor products have been tested, re-tested and refined to bring what we believe is the finest line of compressor products on the market.