ENVIROTECH EAL EP GEAR OILS

EnviroTech® EAL EP Gear Oils are environmentally responsible biodegradable gear oils designed for the protection of gears and bearings in systems where high temperature and/or extreme pressure conditions exist. EnviroTech® EP Gear Oils meet or exceed the following performance requirements: U.S. Steel 224; AGMA 9005/250.04; DIN 51517, Part 3; David Brown DB S1.53.101; Cincinnati Machine E.P. EnviroTech® EAL EP Series complies with the “biodegradable”, “minimallytoxic” and “not bioaccumulative” standards as defined in Appendix A of the 2013 Vessel  General Permit issued by the United States Environmental Protection Agency.

RECOMMENDED USES

EnviroTech® EAL EP Gear Oils are made from a vegetable based formulation recommended for lubricating spur, helical, bevel, and worm gear configurations. These bio-based lubricants are intended for heavy-duty applications subject to heavy loading or shock loading. Classified as ultimately biodegradable (PW1) and non-toxic, EnviroTech EAL EP Gear Oils are ideal for equipment operating in environmentally sensitive areas. Prior to transitioning equipment on board vessels to EnviroTech® EAL Series, the ship owner/operator should verify with the equipment manufacturer that the sealing  system is compatible for use with an EAL.

SEAMER OIL 150 P

Summit Seamer Oil 150 P gear oil is specially formulated to lubricate the gear systems found in “once through” designed can closers used in food canning operations. This machine design allows the oil to cascade through the gears, lubricating as it goes, until it is discharged into the sanitary drain system from the bottom of the machine. Seamer Oil 150 P is blended using the highest quality base stocks and utilizes an additive package that provides excellent wear, EP, and corrosion properties. This superior formulation passes all 12 stages of the FZG Gear Test. Tested extensively, Seamer Oil 150 EP has demonstrated exceptional results when used in this application. Manufactured in Summit’s ISO 21469 Certified facility, this product is produced under the strictest hygienic guidelines for food grade lubricant production. Seamer Oil 150 P is NSF H1 approved for use where there is a possibility of incidental contact with the food being processed.

RECOMMENDED USES

Seamer Oil 150 P is recommended for use on canning machinery operating at 800 cans per minute or less. For machinery operating at speeds above 800 cans per minute, contact your Summit representative.

SEAMER OIL 150 S

Summit Seamer Oil 150 S is a synthetic seamer gear oil that protects the gearing and other moving parts of can seaming equipment that reclaims the used oil. The lubricant also suspends contaminants for filtering and removal of water. Fortified with oxidation inhibitors, corrosion inhibitors and anti-wear additives, Seamer Oil 150 S also holds water, juice, syrups and other contaminants in suspension, allowing for easy removal.

RECOMMENDED USES

Summit Seamer Oil 150 S is designed to lubricate can seaming equipment that reclaims the used oil. Produced in Summit’s ISO 21469 Certified manufacturing plant, Seamer Oil 150 S meets USDA 1998 (H1) guidelines (lubricants for incidental food contact).

NOTE: For canning systems utilizing a “total loss system” or “once through system”, use Summit Seamer Oil 150 P.

SYNGEAR FG SERIES

Summit Syngear® FG (food grade)are fully synthetic lubricants, are H1 and comply fully with the requirements of F.D.A. 21 CFR 178.3570 for lubricants with possible incidental food contact. They are also Kosher approved. Syngear® FG lubricants are fortified with oxidation inhibitors as well as anti-wear/EP additives to pass the highest stages of the FZG test.  They are extended life lubricants and have the same excellent material compatibility as the Summit Syngear Series gear oils.

RECOMMENDED USES

Summit Syngear® FG (food grade)series gear oils are formulated specially for gear systems operating in the food service and packaging industry.

SYNGEAR FOOD GRADE PG SERIES

Summit Syngear® Food Grade PG Series synthetic oils are polyglycol-based products for use in enclosed gear, bearings, and compressors where conditions demand the unique properties of these fluids.  Use these lubricants where there is the potential for incidental contact with food or food packaging.  Better wear protection, thermal and oxidation stability and reduced sludge and deposit formation insure enhanced performance when compared with petroleum-based lubricants.  These lubricants are NSF registered and meet USDA (H1) guidelines (lubricants with incidental food contact) for use in food plants. Summit is an ISO 21469 certified facility. So not add directly to food.

RECOMMENDED USES

The Syngear® Food Grade PG Series are built specifically for use in enclosed gear, bearings, and compressors in situations where there is the potential for incidental contact with food or food packaging. These lubricants are incompatible with petroleum oils.  Care should be taken to prevent the two types of fluids from being mixed.

SYNGEAR HEAVY DUTY SERIES

Most industries in today’s world are shifting their focus toward efficiency improvements by putting an emphasis on reducing energy requirements for equipment used in plant operations and for vehicular equipment. Technological advances in lubricants have helped reduce the input power used to operate equipment by reducing friction. Summit has developed synthetic gear oils which will not only reduce frictional drag, but will also protect gears against failures associated with heavy loading.

RECOMMENDED USES

Syngear® Heavy Duty Series meet the requirements of the API designations GL-5 & MT-1, the MIL-L-2105E specification, SAE J2360 and the Mack GO-J specification. Summit Syngear® Heavy Duty Series lubricants are designed to meet the requirements of Eaton and Rockwell differentials.

SYNGEAR PG SERIES

Summit Syngear® PG synthetic gear oils are polyglycol-based products for use in enclosed gears, bearings, and compressors where conditions demand the unique properties of these fluids.  Better wear protection, thermal and oxidation stability, and reduced sludge and deposit formation insure enhanced performance when compared to petroleum-based lubricants.

RECOMMENDED USES

Summit Syngear® PG synthetic oils were built specifically for use in enclosed gears, bearings, and compressors where conditions demand the unique properties of these fluids.

SYNGEAR SH-1000 SERIES

Syngear® SH®-1000 series gear oils are formulated with synthetic base stocks and fortified with select additive systems to enhance their exceptional performance.  The synthetic base fluid used has outstanding oxidation and thermal stability, naturally high viscosity index and excellent low temperature pumpability and fluidity.  The unique additive system used provides increased oxidation stability, extreme-pressure properties, and maximum protection against wear, rust, corrosion and foaming.

In today’s world of efficiency improvements, there has been much emphasis placed on reducing energy requirements for equipment used in plant operations.  Summit Syngear® synthetic gear lubricants have proven to reduce friction, thereby reducing the input power to operate the equipment or increasing the available power output.  The reduction of fluid friction results in lower lubricant operating temperatures, prolonging the life of both the lubricant and the equipment.  The additive system used in this product not only reduces frictional drag, but also protects gears against failures associated with heavy loading and meets the requirements of AGMA 250.04 and API GL-4 Gear Service Category.

RECOMMENDED USES

Syngear® SH® 1000  series gear lubricants are recommended for use in all types of enclosed gearing as well as plain and rolling element bearings.  These lubricants are ideal for heavily loaded low speed gears and bearings where boundary or elasto-hydrodynamic lubrication (EHL) conditions exist, such as in mine hoist gear reducers.  They are particularly recommended for gearboxes which operate under excessively high temperatures where good quality conventional oils rapidly oxidize. Summit Syngear® Heavy Duty series gear lubricants may also be used in certain open gear applications, but it is recommended that Summit lubrication engineers be consulted to select the most effective method of application.

Syngear® SH® 1000 gear lubricants are compatible with most seal materials, paints and plastics, including nitrile  Buna N, neoprene, Viton®, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfide, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.

SYNGEAR SH-7000 SERIES

Summit Syngear® SH®-7000 Series synthetic gear and bearing oils are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming.  These synthesized hydrocarbon fluids (SHF) provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The high inherent viscosity index of these oils provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures.  The low coefficient of friction of the Summit Syngear® SH® Series lubricants substantially reduces power consumption and gearbox operating temperature, further prolonging the useable life of this lubricant.

RECOMMENDED USES

Summit Syngear® SH® Series lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or roller element bearings.  They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs.  Summit Syngear® SH®-7032 through Syngear® SH®-71000 are also recommended for use in applications where the corrosion of yellow metals is a concern as these lubricants do not contain additives which tend to attack metals such as brass, bronze or copper. The Summit  Syngear® SH®-Series lubricants are compatible with essentially all seal materials, plastics and paint, including nitrile Buna N, neoprene, Viton®, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.

SYNGEAR WT SERIES

Summit Syngear® WT Series lubricants are fully synthetic high performance gear oils enhanced with new generation anti-micropitting additives. The PAO base oil has outstanding oxidation and thermal stability, naturally high viscosity index and excellent low temperature pumpability and fluidity. The additive system not only minimizes scuffing wear, but offers a high level of resistance to micropitting fatigue. High load carrying capability and low sludge formation make these superior lubricants a choice for many industrial applications. Syngear® WT Series provides maximum protection against rust, corrosion, and foaming.

RECOMMENDED USES

Summit Syngear® WT Series are recommended for highly loaded enclosed gearing as well as plain and rolling element bearings. These shear stable lubricants resists damage to gear teeth caused by repeated shock loads. Syngear® WT Series lubricants are ideal for wind turbine gearboxes, mine hoist gearboxes, crane gearing, and other enclosed gearing which requires micropitting resistance. Highly loaded gearboxes in the steel, paper and cement industries are natural applications. These extended life oils perform very well in extreme environments.

SYNTENAL CD-50 EQ

Summit Syntenal CD-50 EQ is a fully synthetic manual transmission lubricant for year-round use in off and on-highway equipment.  Syntenal CD-50 EQ meets the API service CD/SF classification and is suitable for transmissions and gear cases where API GL-1 through GL-3 gear protection is required.  It also has a very low pour point and an inherently high viscosity index for excellent cold temperature flow as well as enhanced high temperature lubricating properties.

RECOMMENDED USES

Summit Syntenal CD-50 EQ is designed to meet the requirements for Eaton and Rockwell transmissions. It’s also recommended for heavy duty manual transmissions; for on-highway, commercial light and heavy duty trucking, buses and vans; and off-highway construction, agriculture, and other industries. Contact Summit for specific application questions.

UNIPAR FG SERIES

UniPar FG Series gear oils are specially formulated for gear systems operating in the food service and packaging industries. UniPar FG Series lubricants are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). In addition, these gear oils are Kosher approved. UniPar FG lubricants are fortified with oxidation inhibitors as well as anti-wear/EP additives to pass the highest stages of the FZG test.

RECOMMENDED USES

UniPar FG Series gear oils are ideal for the lubrication of production equipment in beverage canning, bottling operations, meat and poultry processing, dairy operations, fruit and vegetable processing, bakeries, and pharmaceutical plants.